Technical Info (About Acrylic Stucco)
If you want to use acrylic stucco, it is important that you know everything there is to know about it and to have technical info. Acrylic stucco is basically a mixture of high-performance acrylics that have been specially blended for adhesion, flexibility, breath-ability, toughness, and texture. Added to this formulation is a special aggregate compound and ceramic compound to ensure that stucco has the right texture, but also that it has characteristics that you will not find in standard stucco dry mix rations.
Other stucco technical info include the facts that the coating thickness at 20 sq.ft./gallon is 64 dry mils or 1/16 inch, that the dry time is 12 hours to touch as overnight to recoat, that it takes 7 days at 75 degrees Fahrenheit and 50% relative humidity to fully cure, that percentage volume in the mixture is 70% by volume, that weight per gallon is 16.5 lbs, and that clean up for both equipment and person is simply soap and water.
When going through technical info, it is important to note the characteristics of acrylic stucco. Acrylic stucco is water-proof, meaning it is not affected by moisture-penetration or water. Edmonton Acrylic stucco is designed to have a long bonding life as it will not peel or crack easily. Acrylic stucco is UV-protected for durability against hot weather conditions and it is hardens further when exposed to high humidity and rain. Acrylic stucco is tough and durable, meaning it will give you years of added beauty and service. Unlike standard stucco, acrylic stucco breathes and can flex with substrates without cracking, thereby increasing its longevity. Acrylic stucco has mildewcide in its formulation to guard against mildew.
Acrylic stucco was designed several decades ago with '0' VOC's. It contains no known carcinogens and it is used for different surface structures such as wood, metal, stone, fibreglass, concrete, or composites. There are no known health concerns that have been raised over the years. If the quantity being applied is a minimum of 300 gallons, acrylic stucco can be batched in different colours as desired to beautify your home's. You can top coast acrylic stucco with Multi-Ceramic RE19 Coating for extra insulation. This causes the surface to have an insulating effectiveness that is equal to R-equivalency of 19 on your exterior walls.
When studying technical info about stucco, it is important that you know how to use the stucco. You should not ingest acrylic stucco under any condition and you should avoid contact with the eyes. If the solution comes into contact with your eyes, flush them immediately with clean running water and contact a doctor immediately. To remove acrylic stucco from the skin, wash off the stucco with water before it dries. You should consider enlisting the services of an Edmonton professional to apply the stucco for you. Professionals offer convenience and professionalism since they have the necessary experience, know-how, and tools.